Sherman Oaks, CA · About 15 minutes from Burbank
Handyman Services in Sherman Oaks, CA
Drywall patches, sticking doors, mounted TVs, assembled furniture, dead outlets, wobbly railings and the eleven other things on the list stuck to your fridge. Handled in one trip, for one agreed price.
- Serving all of Sherman Oaks and the surrounding area
- Free estimates by phone, photo or in person
- Flat prices agreed before work starts
- 90-day labor warranty on all work
Handyman Services for Sherman Oaks homes and businesses
Sherman Oaks handyman calls split along Ventura Boulevard almost perfectly. North of it, the flats are dense with 1950s and 1960s single-family homes plus a large apartment and condo stock — that's the classic punch-list territory: sticking doors, plaster and drywall repair, blinds, fixtures, faucets, disposals, dead outlets, and the kitchen remodel from 2012 that's now developing problems. South of Ventura, the hillside streets bring deck and railing work, outdoor structure assembly on sloped ground, mounting into awkward walls, and jobs where getting the ladder into position is half the work.
The most valuable thing I do in Sherman Oaks is batching. It's about fifteen minutes from Burbank, which means a single small job is mostly travel cost. Eight small jobs in one visit is efficient for both of us — you pay for a half-day and the list that's been sitting on your counter since spring disappears.
Handyman Services pricing in Sherman Oaks
Real ranges for the work most often requested. Yours is confirmed in writing before anything starts — no surprises at the end.
| Service | Typical price | What's included |
|---|---|---|
| Minimum service visit (up to 1 hour) | $95 – $135 | Covers travel, diagnosis and one small task |
| Half-day punch list (up to 4 hours) | $340 – $480 | Usually 4–8 small jobs across the house |
| Full-day punch list (up to 8 hours) | $620 – $850 | The whole list, plus a hardware store run |
| Drywall patch (hole up to 12") | $140 – $260 | Patch, tape, texture match, sanded and primed |
| TV wall mount, up to 65" | $150 – $250 | Stud-mounted, leveled, cables concealed in-wall |
| Furniture / shelving assembly | $85 – $190 per unit | Wall-anchored where the item requires it |
| Interior door adjust or replace | $120 – $380 | Planing, new hinges, strike plate, or full slab swap |
| Ceiling fan or light fixture swap | $140 – $240 | Existing box and wiring, like-for-like replacement |
What Sherman Oaks properties typically need
- Appliance repair on 10–15 year old kitchen remodels hitting end-of-life
- GFCI upgrades in older kitchens and bathrooms
- Camera systems for hillside driveways and gated approaches
- Whole-home Wi-Fi in split-level and multi-story homes
- Pergola and patio cover assembly with proper leveling on slopes
- Condo and apartment appliance and handyman work
Areas of Sherman Oaks covered
Sherman Oaks flats · South of Ventura hills · Chandler Estates · Sherman Circle · Longridge Estates · Royal Woods · Van Nuys Boulevard corridor · Sepulveda corridor — plus everywhere in between. ZIP codes 91403, 91423, 91411.
For the full detail on what's covered, what isn't, brands handled and the legal limits I work inside, see the main handyman services page. For everything else I do in this city, see Sherman Oaks services.
How a job actually goes
- 1
Tell me what's wrong
Call, text a photo, or fill in the form. Photos of the model plate or the problem area cut the guesswork enormously.
- 2
Get a real price range
You get a range before I drive out, not after. If it's a job that needs a licensed contractor, I'll tell you that on the phone instead of wasting your time.
- 3
I show up in the window
You get a text when I'm on the way. Shoe covers, drop cloths, and the work area left cleaner than I found it.
- 4
Pay when it works
Flat price agreed up front. Card, Zelle, cash or check. Parts I install carry the manufacturer warranty and my labor is guaranteed for 90 days.
Handyman Services in Sherman Oaks — common questions
How much does a handyman cost per hour in Burbank?
Independent handymen in Burbank and the surrounding San Fernando Valley generally charge $85–$125 per hour in 2026, and most set a one-hour minimum that covers travel and diagnosis. I quote flat prices per job rather than hourly, so the number you're told is the number you pay even if the job turns out to be more work than it looked. A typical single small repair lands at $95–$135; a half-day of stacked-up small jobs runs $340–$480.
Do you charge a trip or diagnostic fee?
No trip charge anywhere in Burbank. For estimates I'll give you a price range over the phone or from photos for free. Outside Burbank, the estimate is still free — travel is simply built into the quoted job price rather than billed separately.
Can a handyman do electrical and plumbing work in California?
Yes, within limits. California's §7048 exemption lets an unlicensed person perform work where labor and materials total under $1,000, no permit is required, and no employees are used. That covers a great deal of practical work: replacing outlets, switches, ceiling fans and light fixtures on existing circuits, swapping faucets, toilets, disposals and shut-off valves. It does not cover new circuits, panel work, gas lines, repiping or anything that needs a permit from Burbank's Community Development Department. I stay inside the line and tell you clearly when a job crosses it.
How fast can you get here?
Most calls placed before noon get a same-day or next-morning slot. Burbank, Toluca Lake, Glendale and North Hollywood are usually same-day. The outer edge of the service radius — Santa Clarita, Woodland Hills, Arcadia — is usually next-day. Genuine emergencies (active leak, no power to a room, a door that won't lock) jump the queue.
Do I need to buy the materials myself?
Whichever you prefer. If you've already bought the faucet, the fan or the flat-pack, great — I'll install it. If not, I'll pick up materials and bill them at cost with the receipt. There is no markup on materials.
Do you serve both sides of Ventura Boulevard?
Yes — the flats north of Ventura and the hillside streets south of it, plus the 91411 area toward Van Nuys. Sherman Oaks is typically same-day or next-day.
Can you install a pergola on a sloped Sherman Oaks lot?
Yes. The leveling is the real work — a structure assembled on a slope without proper shimming and anchoring ends up racked and eventually loosens. That prep is included in the assembly price rather than treated as an extra.
What neighbors say
Sample content. These reviews are placeholders written to show the layout. Replace them with real customer reviews in src/config.py, then set PLACEHOLDER_REVIEWS = False to enable review structured data.
“Our Samsung fridge stopped cooling on a Friday. Armen came out the same afternoon, found a failed evaporator fan, and had it running before dinner. He showed me the old part and explained exactly what happened. No upsell, no drama.”
“Three-story townhouse with Wi-Fi that died on the top floor. He ran a hardwired access point instead of selling me another extender, and now I get full speed in every room. He labeled every cable in the closet too.”
“Four cameras around the house plus a doorbell, all on my phone. He walked the property with me first and moved two camera positions based on where our packages actually get dropped. Clean cable runs, nothing hanging.”
Related pages
- All services in Sherman Oaks
- Handyman Services — full details
- Handyman Services in Glendale
- Handyman Services in North Hollywood
- Handyman Services in Pasadena
- Appliance Repair in Glendale
- Appliance Repair in North Hollywood
- Appliance Repair in Pasadena
- Appliance Repair in Sherman Oaks
- Computer Repair in Glendale